If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Me and my friend make a server and type the IP in and it tries for 10 seconds and fails
Need more information. Are you trying to connect between houses, or just two computers within the same house? You might need to open a port on the firewall on the box running the server. Typically it's TCP port 26000.
No, UDP, but that doesn't really matter. A standard Quake server needs to be in the DMZ in order for it to work properly, unless you're running a Darkplaces server, which requires only port 26000 UDP to be forwarded.
I think I already met this guy in QW. Apparently, the Steam community does a lousy job in informing new people. They also don't know that there's a difference between Quake and QW, or how to connect to a server. They basicly try to do everything via Steam, since that's what they do with all games bought through Steam.
Err... the Steam interface won't help with Quake, at all. To connect to Quake servers, you have to open the console, and type connect wherever, for example, connect quake.shmack.net will take you to the popular runequake server.
Putting your router into DMZ disables the firewall and opens all ports.
What you want to do is set up port triggering for 26000 and set a range of ports.
WARNING
May be too intense for some viewers. Stress Relief Device
....BANG HEAD HERE....
---------------------------
.
.
.
.
.--------------------------
I do not know if it will work with a virtual private network.
WARNING
May be too intense for some viewers. Stress Relief Device
....BANG HEAD HERE....
---------------------------
.
.
.
.
.--------------------------
Putting your router into DMZ disables the firewall and opens all ports.
What you want to do is set up port triggering for 26000 and set a range of ports.
All the DMZ does is forward all ports to a specific network machine unless told otherwise (standard port forwarding takes precedence over the DMZ). It doesn't bring the whole firewall down.
All the DMZ does is forward all ports to a specific network machine unless told otherwise (standard port forwarding takes precedence over the DMZ). It doesn't bring the whole firewall down.
It disables the Hardware firewall built into the router
It does not disable the software firewall built into windows.
WARNING
May be too intense for some viewers. Stress Relief Device
....BANG HEAD HERE....
---------------------------
.
.
.
.
.--------------------------
Comment