Re: dammm map probs (SOLVE)

[ Follow Ups ] [ Post Followup ] [ The Factory MessageBoard ] [ FAQ ]

Posted by Ivan[RAT] on May 01, 1999 at 06:14:24:

In Reply to: Re: dammm map probs (SOLVE) posted by grimm [502] on August 10, 1998 at 17:40:06:

down). Here is something

: I found that may help you with your problem

: This happens when you make a connection to the outside

: world by carving and then fill the hole again with

: an entity-bound brush; for instance, you cut a hole in

: the ceiling and refill it with a button; you can avoid this

: problem by carving not so deeply, so you have no

: connection to the outside world, or you can put a solid

: brush (not bound to an entity) over the hole. - Matthias Hoys

: This information was gathered at a great troubleshooting

: site, which WAS down but has been put back up it seems.

: Follow the optional link below.

Has anyone thought to check if the level was vised or if it had any leaks

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: down). Here is something : : I found that may help you with your problem : : This happens when you make a connection to the outside : : world by carving and then fill the hole again with : : an entity-bound brush; for instance, you cut a hole in : : the ceiling and refill it with a button; you can avoid this : : problem by carving not so deeply, so you have no : : connection to the outside world, or you can put a solid : : brush (not bound to an entity) over the hole. - Matthias Hoys : : This information was gathered at a great troubleshooting : : site, which WAS down but has been put back up it seems. : : Follow the optional link below. : Has anyone thought to check if the level was vised or if it had any leaks

Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ The Factory MessageBoard ] [ FAQ ]