When I jump into water in TFC everything is dark green, and the water surface is light green. I can't see anything, how can I fix this?
When I jump into water in TFC everything is dark
green, and the water surface is light green. I can't see
anything, how can I fix this?
This is most likely due to a problem with
your video configuration in Half-life/TFC.
Make sure you have the latest drivers for your video card. The best place
to check for this would be the website of whichever company makes your
video card. If those drivers don't seem to have been updated in a while, or
don't fix the problem, you may want to check the website of the company
that makes the chipset used on your card. For instance: nVidia makes the TNT, TNT2, and GeForce
chips which go onto those cards, 3dfx
makes the Voodoo chipsets, and S3 makes
the Savage chipsets.
Remember, of course, that the drivers from the makers of the chipsets are
not always fully functional with all video cards that use those chipsets,
because the cards may support features that are not a part of the reference
design of the chipset. So, be sure to try the drivers from the board's
manufacturer first.
If updating the drivers doesn't work, it may be a compatability problem
with the way your card handles the water effects, and you may have to try
switching video modes to OpenGL, Direct3D, or software mode, depending on
what you are currently using (software mode should work regardless of your
card's 3d rendering capabilities).
|
Having trouble getting your TF/TFC install working up to snuff? Here's the place to visit to get the help you need! Email: 
News
RSS Feeds
